EVO JK/JKU Draglink Flip kit w/ HD Raised Trackbar Bracket and Ram Assist

EVO JK/JKU Draglink Flip kit w/ HD Raised Trackbar Bracket and Ram Assist
Click to enlarge

TECHNICAL DOCUMENTS:

Installation Instructions: EVO-1071RAM.pdf

MSRP Price:

$307.99

Model: EVO-1071RAM
Manufacturer: EVO MFG



Products are sold through our dealer network including:

Off Road Evolution, Amazon, Northridge 4X4, QuadraTec, Morris 4X4 Center.





For International and Local dealers near you, email info@evomfg.com

When lifting your JK 3” or greater, it is highly recommended to correct
some of the steering geometry that has been altered with the lift. The
EVO JK Draglink Flip Kit does just that and more. This system, raises
the trackbar mounting location 3” at the axle to help correct roll
center and steering angles of a lifted JK.  In doing so, roll center (a
very important component of drivability is greatly improved giving
better handling of the vehicle on and off road.  This system includes a
new forged draglink for top of knuckle mounting and the EVO MFG Front
Trackbar bracket with RAM assist bracket assembly.  This is used when
removing the very weak factory Jeep Wrangler JK front trackbar bracket
on both Dana 30 and 44 axles and replace with a extremely strong formed
Steel, internally gusseted and keyed bracket assembly.  This assembly
relocates the trackbar vertically to correct roll center and works only
with flipped JK draglinks (complete steering kits with this brackets are
available, EVO-1071RAM).  It can be used with a steering stabilizer or
ram assist systems with the included mounting tabs.  When installed with
a ram assist system, this bracket assembly places the ram in the ideal
location, parallel and level with tie rod.  This is important to correct
steering response and alleviate any unwanted side loading of the tie
rod.  Additional features include a high clearance design with
integrated slopping skid plate and ample welding connection to the axle
tubes to insure a strong connection.

Notes:
  Drilling of the passenger side steering knuckle with 13/16” drill bit
is required to complete the install.
  Cutting and welding is required.

Builder parts: Bracket kit comes unassembled and requires welding and
possibly some adjustments with aftermarket part combinations

EVO JK/JKU Draglink Flip kit w/ HD Raised Trackbar Bracket and Ram Assist
Click to enlarge